Siemens KNX/DALI Gateway N 141/02

Configuration

In addition to the common configuration options the following configuration options are available for each channel:

parametertypeoptional/mandatorycommunication objectdescriptiondefault
Fault Power FailureItemIdOKNX Object #6True, if there is a power failure on the DALI bus.
Fault DevicesItemIdMKNX Object #5, polledTrue, if there is a lamp or ballast failure for at least 1 DALI device.
Fault Short CircuitItemIdOKNX Object #7True, if there is a general short cut on the DALI bus.
Error StatusItemIdMKNX Object #11

Emergency Test IntervalintO
Specifies how long the driver will wait between sending two emergency start requests.10 s

Since these gateways do not have a global KNX communication object for starting an emergency test and for getting the result (they have a separate object for each device), the ItemIDs has to be configured for each emergency lighting separately. This is done in the Emergency Test Mapping.

Functional description

refer to Siemens KNX/DALI Gateway N 141/03, N 141/21, N 141/31